Servo Gear

Posted on | November 12, 2009 | 1 Comment

Servo Gear

what's the function of the friction band on a automatic transmission?

I have a 4 speed automatic transmission. It doesn't goes into 4th gear and reverse, might it be the friction band or something else. I have changed all the clutches and the band, but I don't know how tighten it has to be. maybe the servo has to move some 3/4 of an inch to stop the drum. does anyone knows how how tighten it has to be. it is a 1999 nissan quest.

the band adjustment on the outside of the trans is bring adjustment down to snug than back off 4 turns then tighten the nut. if you do not have reverse you have another problem have you changed lip seals in the trans?which are the rubber o-rings in the drums and bottom of case for reverse.also that band comes on in second gear so if you have second you might also have a problem with the servo if i remember right that is a three piece servo you might have a piston backwards or as in above you also have o-rings in there and tha o-ring on the piston for 4th might not be any good

servo gear replacement

Account limit of 2089 requests per hour exceeded.

the guillow piper super cub 95 parts help.?

i am making a super cub 95 can someone tell me the parts you need to make it petrol yes i now its better electric.
what servos Fuel tank glue paint radio Gear engine paint brush every thing.

and tips on making if possible thanks

The best thing to do is a web search, you should have a couple of hits on sites that provide info on piper super cub 95.!!!

Comments